Tri Led Lighting
| Powered by phpBay Pro |
Ohms & Pyle Amp?
Wats The Best Ohm Independents For Subwoofers? 2ohm,4ohm,6ohm,3ohm,8ohm,Etc.? & Whats The Difference Between All Of Them & 1 More Thing Is That 2000 Watt Pyle Dryver Amp Good Or Will Itt Blow Out Eazy & Fast?
Details:
4x 200W RMS at 4 Ohms
4x 500W MAX at 4 Ohms
2x 800W MAX at 4 Ohms Bridged
4x 350W RMS at 2 Ohms
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Tri-Mode Capable
Gold Plated RCA Inputs
Line Outs for 1 and 2 Channel
Low Pass Filter Control
High Pass Filter Control
Remote Bass Level Control
Power and Protection LED Indicators
Red Lighting Illumination
Side Leg Mounting
THD: <0.04%.
S/N Ratio: >90dB
Input Sensitivity : 100mV ~4V
Channel Separation : >65dB
Freq. Response : 10Hz ~ 30KHz
Patent Pending
Soft Turn-on/Turn-off
Dimensions : 8.6''(W) x 2.74''(H) x 12.6''(L)
What Does Mosfet Mean?
& How Many Subs Can You Hook Up 2 That Amp?
4x 200W RMS at 4 Ohms
2x 700W RMS at 4 Ohms Bridged
4x 350W RMS at 2 Ohms
Don't expect these to be accurate numbers as pyle exaggerates their specs.
Metal Oxide Field Effect Transistor - it's just the type of power transistor used and is common.
You can put as many speakers on a channel as long as the impedance (ohms) doesn't fall fall below what the amp can handle OR the subs power handling isn't exceeded.
More info here http://spkrbox1.spaces.live.com
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
Leave a Reply
You must be logged in to post a comment.