Stage Light Effect
| Powered by phpBay Pro |
I own an 04 ram w/ a hemi Check engine light came on bcause of cylinder misfire I changed my plugs No effect?
I added a dub air cold air kit, jet performance throttle body spacer, stage 2 performance module, and low temp thermostat. I also replaced the stock wires with high performance wires. Originally replaced stock plugs with Bosch fusion plugs. Thats when the check engine light came on, i was told by several mechanics that it was the plugs, so i switched back to the champions and i doubled checked the gap at .045. The light is still on and it still feels like a have a misfire. Not sure which component or combo thereof is causing the problems. Any input would be appreciated.
try resetting the pcm... go to the fuse panel under the hood, look for fuse pcm, pull it out, turn the key as if you are stating the engine and keep it turned, you will hear a chime 1 which resets the computer, then a chime 2 that resets the trans ecm... this is better then pulling the battery cable off which only flashes the codes you are seeing... do this then drive it and see if the codes come back..
one more thing to check is where the mileage reads, turn the key on but not starting and off, 2 times then on the 3rd leave it in the on position, write down the codes it flashes in the mileage area for example P2505
then look them codes up on google or call any autozone, and see what part is whacked out.. very simple as this works on all dodges and saves time and money 
ok douchebag that down thumbed me you need to go to school
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
Leave a Reply
You must be logged in to post a comment.