Juice Machine Fluid
| Powered by phpBay Pro |
Dense fog fluid for fog machine?
I have to fill up a oversized indoor basketball court with fog. It's for an activity. I tried regular fog juice but the room is so big that it just disapears into the air, even with the dogger on for 20 minutes. So is there some thicker or better fluid that I can use?
The problem isn't the fog juice, its the fogger. I'm guessing you have a 400 watt machine that came out around halloween. If this is the case, you can't pull it off with this equipment. A 400W machine can only produce between 1,700 and 2,000 cubic feet per minuet. This would seem to be enough, but remember that the fog machine has to recharge between burns. Which means, although it can produce 2,000 cubic feet in a minuet, doesn't mean that it can do it continuously. Also, remember that there is minimum total of 100,000 cubic feet in the gym. Your best bet is to buy 4 fog machines that can produce 10,000 cfm.
However, if you're wanting it to stick to the floor, then that's a whole new ball game. You'll still need a stronger fog machines (2 700W machines should do) but use 2 fog chillers.
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
Leave a Reply
You must be logged in to post a comment.